Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 335)

USB Protocol Suite User Manual Chapter 12: Traffic Generation (3.0 Exerciser)
LeCroy Corporation
321
12.8 Graphical Scenario Editor
The Graphical Scenario Editor allows you to create Host Emulator scenarios (only), using
high-level constructs and graphical elements.
After inserting an item, you can modify these elements through simple edit boxes and
pull-down selections by clicking on elements.
You can insert the following items:
•
High-Level SCSI Commands (SPC-3, SBC-2, SMC-2, SSC-2, MMC-5, SCC-2, and
SES-2)
• High-Level Task Management Functions
• Bus Enumeration / Control Requests
• Settings
• Mass Storage Transfer Packets
• Instructions (Start Loop, End Loop, Delay, Stop Exerciser)
After you create a new graphical scenario, use the following steps to edit or build the
scenario.