Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 275)

USB Protocol Suite User Manual Chapter 10: Recording Options
LeCroy Corporation
261
Changing a Counter Value
To change the counter value:
Step 1 Click the small blue dot in the upper-left corner of the counter button. A menu
appears.
Step 2 Select Change Counter Value.
Step 3 Enter a new value in the pop-up dialog box. This causes the new value to appear
in the counter button.
10.5.9 Actions and Action Properties
The Actions are:
Action Properties (of the Error Event)
You can set Internal Triggering, External Triggering, Sequencing, and Filtering.
Event Description
Trigger Start recording.
Filter In Include in the trace file the event specified (and no others).
Filter Out Exclude from the trace file the event specified.
Advance the Sequence Go to the next state in this sequence
(sequence in which this action is located).
Restart All Restart all sequences.
External Trigger Pulse HIGH Send HIGH pulse on external trigger output.
External Trigger Pulse LOW Send LOW pulse on external trigger output.
External Trigger Pulse TOGGLE Send HIGH-LOW pulse on external trigger output.
Properties Opens the Event Properties dialog box.