Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 58)

Chapter 2: General Description USB Protocol Suite User Manual
44
LeCroy Corporation
2.16 Advisor Specifications
2.16.1 Package
2.16.2 Power Requirements
90 to 254 V AC, 47 to 63 Hz (universal input), 100 W maximum
2.16.3 Environmental Conditions
2.16.4 Switches
2.16.5 LEDs
2.16.6 Recording Memory Size
128 megabyte DRAM for traffic data capture, timing, state and other data
Dimensions 9.2 x 8.4 x 2.5 inches
(23.4 x 21.3 x 6.4 cm)
Connectors AC power connection
Trigger IN/OUT input (BNC)
Host connection (USB, type B)
Data connector (Data In/Out, 9-pin DB)
Weight 2.8 lbs. (1.2 kg)
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Range -20 to 80°C (-4 to 176°F)
Operating Humidity 10 to 90%, non-condensing
Operating Altitude Up to 6560 feet (2000 meters)
Power on/off
Manual Trigger Forces trigger event.
Detach Device Detaches the device from the classic speed connection.
Power (PWR) Illuminated when the Analyzer is powered on
Recording (REC) Illuminated when the Analyzer is actively recording traffic data
Triggered (TRG) Illuminated during power-on testing and when the Analyzer has
detected a valid trigger condition
Uploading (UPLD) Illuminated when the Analyzer is uploading its recording memory
to the host PC for display