Chapter 12: traffic generation (3.0 exerciser), 1 connecting to voyager, 1 host emulation – Teledyne LeCroy USBTracer_Trainer - Users Manual User Manual
Page 321: Chapter 12 traffic generation (3.0 exerciser)
USB Protocol Suite User Manual
Chapter 12: Traffic Generation (3.0 Exerciser)
LeCroy Corporation
307
Chapter 12: Traffic Generation
(3.0 Exerciser)
The USB 3.0 Exerciser allows you to generate USB 3.0 traffic and test designs under
realistic conditions. Traffic Generation can also transmit known bad packets, providing an
opportunity for engineers to observe how a device handles specific adverse conditions.
Note: For traffic generation for USB 2.0, see “Traffic Generation (2.0)” on page 277.
12.1 Connecting to Voyager
The connections differ for Host Emulation and Device Emulation.
Full Speed, Low Speed, Hi Speed, and SuperSpeed connections are the same.
You only need to plug into the Exerciser ports, because there is an internal Analyzer tap.
12.1.1 Host Emulation
For Host Emulation, connect a cable from Device under Test to Exerciser “A” port.
Device under Test