IAI America CON-PGA User Manual
Page 81
5. Operation of CON Related Controllers
73
5.9.3 Direct Movement Operation
A position is specified directly to move the axis.
x
[SV ON]
:Touching [SV ON] while the servo is off turns on the axis servo and { becomes lit.
Touching [SV OFF] while the servo is on turns off the axis servo and { becomes unlit.
x
[HOME]
:Touching [HOME] while home return is not yet completed causes the axis to return
home and { becomes lit.
x
[Target Pos]
:Touching [Target Pos] displays the numeric keypad. Enter a desired target position
and then touch [ENT].
x
[Velocity]
:Touching [Velocity] displays the numeric keypad. Enter a desired speed and then
touch [ENT].
x
[Move]
:Touching [Move] moves the axis to the target position you have set. The current
position can be checked by the display in Current Pos.
x
[Stop]
:Touching [Stop] stops the axis.
x
[Menu1]
:Move to the Menu 1 screen.