IAI America CON-PGA - Manual (Page 172)

6. Operation of SEP
Related Controllers
164
The settings of operation pattern 5 (continuous back-and-forth operation) vary partially from other operation
patterns.
x Start :Continuous operation stops once the operation test screen appears.
Touching [Start] causes the actuator to move back and forth continuously at the speed set
by the override parameter.
x Stop :Touching [Stop] stops the actuator.
x Reset :Touching [Reset] resets the back-and-forth counter to 0.
Continuous operation resumes once the operation test screen closes.
The current axis position is indicated.
The axis speed is indicated.
The electric current of the axis is indicated by a
percentage of the rating.
The electric rated current ratio/current value of the
axis is indicated by a percentage of the rating.