IAI America CON-PGA - Manual (Page 185)

7. Operation of MEC Related Controllers
177
7.2 Operating Menu
Transition of operating states when the touch-panel teaching pendant CON-PTA is connected to a MEC
controller is shown.
Password setting Operation Pattern
5119 (at delivery) (Two patterns, 2-point stop and 3-point stop)
Operation pattern
(2-point stop,
3-point stop)
setting
Password setting
Edit of position
data display
If the password is already set
Jog or Inching operation
Position reading operation
Operation test of axis movement
Operation test of
axis movement
Information Menu Display of setting details for operation pattern
(Two patterns, 2-point stop and 3-point stop)
Information
displays for
operation Information display for version, etc.
patterns, version,
etc.
Display of manufacturing information such as serial number
Contact information display
Password setting Parameter list display
5119 (at delivery) (Display of 8 parameters at once)
Parameter display
and edit
Parameter Initializing
Changing parameter back to that when the product was delivered
Parameter
Initializing
System password change
System password
change
Initial Setting Operation Pattern Window
Menu Operation Sub Menu Sub Menu Operation Window
Setting Confirmation Window
Version Information Window
Manufacturing Information Window
Contact Information Display Window
Setting
Confirmation
Version
Information
Manufacturing
Information
Contact
Information
Manual Operation (Jog/Inching) Window
Password
Setting
Test Run Test Run Window
Position
Settings
Password
Setting
Position data display
for such as backward
end and forward end
Position Settings
Window
Position data
window for such
as backward end
and forward end
Position data list Display
(Display corresponding
to operation pattern)
(Note 1) Password setting
It is necessary to have the
parameter settings if Initial
Setting is to be conducted.
If the password is not
changed, set 5119 (the
setting at delivery).
Parameter
Edit Parameter
Window
Edit
Parameter
System Password Change Window
Parameter
Initializing
System
Password
Password
Setting
Parameter setting
menu
Parameter Initializing Window