IAI America CON-PGA - Manual (Page 50)

5. Operation of CON Related Controllers
42
(1) Basic operation
[Data entry on the position data table screen]
You can set the target position, speed, acceleration and deceleration in the position data table.
Touch [n] and [p] to display the table showing the desired position data number.
Or, touch [Specify No] and set the desired position data number to display the table.
Touch a value in the target position or other field of
the desired position data number.
When the numeric keypad appears, key in the
desired value and touch [ENT], and the value will be
entered.
Touching Axis No. switches to the axis selection
screen.
Touching [All Clear] clears all position data.
(Example of entry: P. 58)
[Important]
Do not touch [n] key or [p] key too fast to switch the windows.
‘0’ is occasionally shown to the data values that are already registered.
The data is not lost even though ‘0’ is displayed. Touch [n] key and [p] key to switch the window and come
back, and you will find the data showing the right values.
Touch.