IAI America CON-PGA - Manual (Page 16)

8
Handling Precautions
x In this touch panel teaching, the language to be displayed can be changed.
Refer to the following for how to change it.
x CON related controllers 5.1 Displayed Language Change
x SEP related controllers 6.1 Displayed Language Change
x MEC related controllers 7.1 Displayed Language Change
x Be careful not to apply mechanical shocks on this touch-panel teaching pendant CON-PTA/CON-PDA/CON-
PGA. Failure may occur.
x When operating this touch-panel teaching pendant CON-PTA/CON-PDA/CON-PGA, be sure to hold the
teaching pendant to prevent the cables from receiving unnecessary tensile loads.
x For CON related controllers, do not touch [n] key or [p] key too fast to switch the windows in the table to edit
the position data.
‘0’ is occasionally shown to the data values that are already registered.
The data is not lost even though ‘0’ is displayed. Touch [n] key and [p] key to switch the window and come
back, and you will find the data showing the right values.
x This touch-panel teaching pendant CON-PTA/CON-PDA/CON-PGA is exclusively designed for use
with IAI controllers. Never connect it to other equipment.
Failure may occur.
Caution
Position Data Table