IAI America CON-PGA - Manual (Page 188)

7. Operation of MEC Related Controllers
180
7.4 Initial Setting
When the power is turned on for the first time after the delivery of the controller, the initial setting screen will
appear.
x Select [Yes], and the display will change to the initial setting screen where you can set the operation
pattern.
x Select [No], and the factory set operation pattern, or specifically the 2-point stopping operation mode, will
remain effective.
The display will switch to the position setting screen.
Factory settings
x Operation pattern: Stopping at 2 points
[Refer to 7.6, “Initial Setting.”] [Refer to 7.7, “Position Setting.”]
No Yes