IAI America CON-PGA - Manual (Page 206)

7. Operation of MEC Related Controllers
198
2) Manual axis operation (jogging/inching) (Using ,
jog/inch the actuator to the target position, and then loading the achieved position (current position) as
the end point or start point)
An example of stopping at 2 points is explained.
How to load the current position of 80.0 m as the start point is explained.
No. Operation Screen Remarks
1 Touch [Pos.Edit] on the MEC
menu screen.
2 If the password is not “0000,” the
password entry screen appears.
Enter the password.
A desired position setting passw
ord can be set in the “position data
edit password” field of the
parameter edit screen.
3 Set the position relating to the
start point, acceleration, and
deceleration.
Touch [Forward Position].
Touch [Menu] to return to the MEC
menu screen.
4 Touch [Manu Move]. Touch [Menu] to return to the
position setting screen.
* If home return is not yet
complete, perform home return
first.
5 If the motor power (servo) is
currently OFF, touch [Servo ON]
to turn ON the motor power
(servo).
6
Use to
move the slider or rod to the target
position of 80.0 mm.
x Jogging
Touch any of ,
and the axis will move and
continue moving.
x Inching
Touch any of,
and the axis will move by the
distance corresponding to the
button you have touched.