IAI America CON-PGA - Manual (Page 28)

5. Operation of CON Related Controllers
20
5.3 Initial Screen
Upon connection to the controller, power is supplied to the touch-panel teaching pendant and processing
starts.
When the power is turned on, the IAI logo is displayed for approx. 1 second on the operation display screen
(hereinafter referred to as " operation screen") of the touch-panel teaching pendant, after which version
information is displayed.
If multiple units are connected, the
axis selection screen appears.
Select the axis you want
to connect.
[Refer to 5.4, "Changing
Operating Axis."]
The Menu 1 screen appears.
Select [Yes] (Enable) or
[No] (Disable) for the
enable function
On CON-PDA/PGA
pendants, this screen is
displayed when the
enable function
parameter of the
controller is set to
“Disable.”
Select [Yes] (Disable) or
[No] (Enable) for the
enable function
On CON-PTA pendants,
this screen is displayed
when the enable
function parameter of
the controller is set to
“Enable.”