IAI America CON-PGA - Manual (Page 117)

6. Operation of SEP
Related Controllers
109
6.4 Initial Setting
When the power is turned on for the first time after the delivery of the controller, the initial setting screen will
appear.
x Select [Yes], and the display will change to the I/O setting screen where you can set the operation
pattern (PIO pattern). Select a desired operation pattern and, depending on the selected operation
pattern, also set the single-solenoid, double-solenoid or other operation mode.
x Select [No], and the factory set operation pattern, or specifically operation pattern 0 of double-solenoid
mode, will remain effective.
Factory settings
x Operation pattern 0
x Double-solenoid mode with continuous
current flow
x No servo control
x Home return MANU
x Output mode LS
[Refer to 6.11, “I/O Setting.”] [Refer to 6.10, “Position Setting.”]
No Yes