IAI America CON-PGA - Manual (Page 42)

5. Operation of CON Related Controllers
34
5.7 Position Editing
Set/edit the target position, speed, acceleration, deceleration and other data related to positions. You can
move the axis by jogging or inching.
Touch [Edit Position] on the Menu 1 screen.
If a position password is set, the password setting screen appears.
Enter the position password.
The default password is "0000."
A position data table appears.
Touch Specify No. to set the position number you
want to set, and a table showing the position number
you have just set appears.
To set data other than the target position, speed,
acceleration and deceleration shown in the table,
touch other position number such as "000."
Data of the selected position number appears.
Touching [Multi Pos] returns the screen to the position data table display.
Position No.