Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions - Manual (Page 78)

Logic Functions - Book 1
CONFIGURED LIST BLOCK
3-52
3.6.3 Typical Block Connections for Configured List Block
Typical softwiring block structures used to connect a Configured List block are shown in
Figure 3-16. Connect foreground list data of a Configured List block to the FGLISTIN attribute
of the ICN or MSC block to specify foreground data (data updated every 0.25 seconds in the
link). Connect background list data of a Configured List block to the BGLISTIN attribute of the
ICN or MSC block to specify background data, which will not be in foreground but will be
included in any interface files that you build for this port at compile time.
R
Input 2
Input 1
Operator indication
of data.
Input 4
DI1
Result
R
LN1
Result
Input 3
CL11
ICN1
FGLISTIN
BGLISTIN
DISCLEN
MSC1
FGLISTIN
BGLISTIN
LISTOUT
CL12
LISTOUT
CL10
LISTOUT
Figure 3-16. Typical Block Connections for Configured List Blocks