Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions - Manual (Page 122)

Logic Functions - Book 1
INPUT/OUTPUT MODULE BLOCKS
5-2
AOM Analog Output Module. Reference Section 5.5. This block has a floating pt.
attribute INPUT link for the following module.
2003A Current Output
In general, a digital or analog input or output module may be used in any location. However,
wiring considerations and power considerations, as described in the appropriate installation
book, may require separation of signal types into specific locations. The relationship between
the module blocks and the function blocks is shown in Figure 5-1.
INPUT MODULE TYPES INPUT MODULE BLOCKS INPUT FUNCTION BLOCKS
2001A Voltage Input
2002A Current Input
2012A Current Input with
2-Wire Transmitter Power
2009A RTD Input, 2 Wire
2009A RTD Input, 3 Wire
2013A Thermocouple Input
Thermocouple
Input Module
Block (TIM)
Voltage/Current
Input Module Block
(VCIM)
Thermocouple
Input Block (TI)
Temperature
Transmitter Input
Block (TTI)
RTD Transmitter
Input Block (RTTI)
RTD Input
Module Blocks
(RIM, WRIM) RTD Input Block
(RTI)
Resistance Input
Block (RI)
Voltage Input
Block (VCI)
Degrees
Engineering
Units
Degrees
Degrees
Degrees
Engineering
Units
Figure 5-1. Analog Input Module and Input Function Block Relationships