Modcell serial communication block events, 4 modcell serial communication block events – Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions User Manual
Page 117
Logic Functions - Book 1
MODCELL SERIAL COMMUNICATION BLOCK
4-35
4.3.3 Typical Block Connections for Modcell Communication Block
Typical softwiring block structures used to connect an MSC block are shown in Figure 4-9.
MSC1
Operator indication
of data.
Command
SROIN1
SRWIN1
LISTOUT
ML2
LISTOUT
INPUT1
MSC1
Operator indication
of data.
Command
FGLISTIN
BGLISTIN
CL10
LISTOUT
CL12
LISTOUT
INPUT1
ML1
Figure 4-9. Modcell Serial Communication Block, Typical Block Connections
4.3.4 Modcell Serial Communication Block Events
The event codes (and their suggested text messages) for the Modcell Serial communication
block are given below. See the referenced data base attributes (in brackets) for additional
information. See the system event block for event transition information.
4 MODULE MISMATCH (5)
5 MESSAGE CHECK ERROR (8)
6 PARITY ERROR (10)
7 BREAK ERROR (12)
8 FRAMING ERROR (14)
9 NOISE ERROR (16)
10 OVERRUN ERROR (18)
11 INVALID MESSAGE (20)
12 EXCESS MESSAGES FOR PORT (22)
13 EXCESS MESSAGES FOR TASK (24)
14 DEFAULT COMM SWITCH SET (26)