beautypg.com

Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions User Manual

Page 54

background image

Logic Functions - Book 1

INTERFACE BLOCK

3-28

13

INSTRUMENT IS OVERCONFIGURED (26)

14

INSTRUMENT POWERED UP (29)

15

INSTRUMENT POWERED DOWN (32)

16

COMMUNICATIONS PORT MISMATCH (34)

17

INSTRUMENT SHUTDOWN FAULT (36)

18

MODULE SHUTDOWN FAULT (38)

19

PROCESSOR WATCHDOG FAULT (40)

20

SPURIOUS EVENT FAULT (42)

21

EPROM CHECKSUM FAULT (44)

22

BAD RAM FAULT (46)

23

I/O BOARD 1 COMMUNICATIONS ERROR (49)

24 through 38 reserved
39

BAD CLOCK CHIP (96)

40

TIME AND DATE NOT VALID (99)

41

I/O IS LOCKED (101)

42

COMMUNICATION BLOCKS ARE LOCKED (103)

43

DMA FAULT (105)

44

I/O OVERRUN (108)

45

COMM HARDWARE FAULT (110)

46

EEPROM FAULT (112)

47

MEMORY MODULE DOWNLOAD FAILED (114)

Informational Events

128

DOWNLOAD FROM MEMORY MODULE
The memory module database was downloaded to main ram.

129

UPLOAD TO MEMORY MODULE
The user database was uploaded to the memory module.

130

DOWNLOAD FROM SYSTEM
A full or partial database download was received from the external system.

131

UPLOAD TO SYSTEM
A database was uploaded to the external system.

132

INSTRUMENT IN UPLOAD STATE
The instrument has entered the upload state and is now running the default database.

133

INSTRUMENT IN DEFAULT STATE
The instrument has entered the default state and is now running the default database.

134

INSTRUMENT BEING CONFIGURED
The instrument has entered the being configured state and is running the default database to
make the main database area available for downloading.

135

INSTRUMENT IN HOLD STATE
The instrument has entered the hold state and is now running only the i/o section of the user
database.

136

INSTRUMENT IN LOCAL HOLD STATE
The instrument has entered the local hold state and is now running only the i/o section of the
user database. It will enter the run state if the run/hold switch is moved to run.

137

INSTRUMENT IN RUN STATE
The instrument has entered the run state and is now running the full user database.

138

TIME STAMP CHANGED
Indicates that time of day, calendar date or day of week has been written to.