beautypg.com

Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions User Manual

Page 63

background image

Logic Functions - Book 1

SYSTEM EVENT BLOCK

3-37

23

Report Diagnostic Event: Enabled (RDGENA) .........................................................CWR
Used to enable the reporting of the event.

YES

1

Report when a diagnostic event suppression attribute is set to
NO to the system event queue.

NO

0

No reports are made.

24

Report Alarm Event: Goes active and unacked (RALAU) .......................................CWR
Used to enable the reporting of the event.

YES

1

Report when a PA or NM alarm goes active and unacknowledged
to the system event queue.

NO

0

No reports are made.

25

Report Alarm Event: Goes active but not unacked (RALANOTU) ..........................CWR
Used to enable the reporting of the event.

YES

1

Report when a PA or NM alarm goes active but not
unacknowledged because it’s priority level is zero to the system
event queue.

NO

0

No reports are made.

26

Report Alarm Event: Goes active while unacked (RALAWU) .................................CWR
Used to enable the reporting of the event.

YES

1

Report when a PA or NM alarm goes active while it is still
unacknowledged to the system event queue.

NO

0

No reports are made.

27

Report Alarm Event: Goes clear while unacked (RALCWU) ...................................CWR
Used to enable the reporting of the event.

YES

1

Report when a PA or NM alarm goes clear while it is still
unacknowledged to the system event queue.

NO

0

No reports are made.

28

Report Alarm Event: Goes clear while acked (RALCWA)........................................CWR
Used to enable the reporting of the event.

YES

1

Report when a PA or NM alarm goes clear while it is
acknowledged to the system event queue.

NO

0

No reports are made.

29

Report Alarm Event: Cleared by suppression (RALCBYS) .....................................CWR
Used to enable the reporting of the event.

YES

1

Report when a PA or NM alarm is cleared by any method of
suppression to the system event queue.

NO

0

No reports are made.