Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions - Manual (Page 236)

Logic Functions - Book 1
ANALOG INPUT BLOCKS (VCI, TII, TI, RI, RTI, RTTI)
7-26
TTI 16 Transmitter Range - Bottom (TRANSLO) ........................................................................ CWR
RTTI 16 Transmitter Range - Bottom (TRANSLO) ........................................................................ CWR
Transmitter bottom of range for TTI and RTTI blocks. Specified in result units as described for
Top of Range.
TTI 17 Output Calibrate - Zero (ZERO) ....................................................................................... CWR
TI 14 Output Calibrate - Zero (ZERO) ....................................................................................... CWR
RTI 14 Output Calibrate - Zero (ZERO) ....................................................................................... CWR
RTTI 17 Output Calibrate - Zero (ZERO) ....................................................................................... CWR
Zero calibration value for TTI, TI, RTI, and RTTI blocks. Specified in result units.
TTI 18 Output Calibrate - Span (SPAN)....................................................................................... CWR
TI 15 Output Calibrate - Span (SPAN)....................................................................................... CWR
RTI 15 Output Calibrate - Span (SPAN)....................................................................................... CWR
RTTI 18 Output Calibrate - Span (SPAN)....................................................................................... CWR
Span calibration value for TTI, TI, RTI, and RTTI blocks. Multiplier with 1.0 nominal.
VCI 17 Quality Limit - Top (QUALHI)............................................................................................ CWR
TTI 19 Quality Limit - Top (QUALHI)............................................................................................ CWR
TI 16 Quality Limit - Top (QUALHI)............................................................................................ CWR
RI 16 Quality Limit - Top (QUALHI)............................................................................................ CWR
RTI 16 Quality Limit - Top (QUALHI)............................................................................................ CWR
RTTI 19 Quality Limit - Top (QUALHI)............................................................................................ CWR
Sets result quality BAD if result exceeds this engineering units value. The top quality limit
must be greater than or equal to the bottom quality limit.
VCI 18 Quality Limit - Bottom (QUALLO) .................................................................................... CWR
TTI 20 Quality Limit - Bottom (QUALLO) .................................................................................... CWR
TI 17 Quality Limit - Bottom (QUALLO) .................................................................................... CWR
RI 17 Quality Limit - Bottom (QUALLO) .................................................................................... CWR
RTI 17 Quality Limit - Bottom (QUALLO) .................................................................................... CWR
RTTI 20 Quality Limit - Bottom (QUALLO) .................................................................................... CWR
Sets result quality BAD if result is less than this engineering units value. The bottom quality
limit must be less than or equal to the top quality limit.
VCI 19 Initial Value (Result) (R).................................................................................................... CWR
TTI 21 Initial Value (Result) (R).................................................................................................... CWR
TI 18 Initial Value (Result) (R).................................................................................................... CWR
RI 18 Initial Value (Result) (R).................................................................................................... CWR
RTI 18 Initial Value (Result) (R).................................................................................................... CWR
RTTI 21 Initial Value (Result) (R).................................................................................................... CWR
This is the output of the input block. This output is the result of an input module producing a
digital count of the analog signal and the input block filtering, normalizing, linearizing, and
converting the input count value to an engineering units value for VCI and RI blocks or to a
temperature value in the specified Temperature Scale units for TTI, TI, RTI, and RTTI blocks.