Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions - Manual (Page 150)

Logic Functions - Book 1
ANALOG INPUT MODULE BLOCKS (VCIM, TIM, RIM, WRIM)
5-30
5.4.3 Thermocouple Input Module Block Description (TIM)
This block is used to input a count value from a voltage or thermocouple input module. It also
performs filtering for the connected thermocouple input block. A functional block diagram of a
thermocouple input module block is shown in Figure 5-16. The menus used to configure the
block are shown in Figures 5-17 and 5-18.
The mnemonics, valid values, and data types for
all fields that may be selected for display and/or be used in making softwiring connections are
listed in Table 5-6.
I/O Selection
Status Register
Unlock
Extended Error
MODMMA
Auto
Mode
Input Module
- Thermocouple Input
- Millivolt Input
I/O
Communica-
tions Error
TC Module
Error
I/O
Mismatch
COMMERRA
TIMERRU
Auto
Manual
Manual
Communications
Error Condition
BAD
GOOD
BAD
GOOD
Unlock
Lock
Error Checks
I/O Lock
(from IF Block)
Lock
GOOD
Diagnostic
Group
Thermocouple
Type
Board Number
Slot Number
Module ID
FRQ
Quality Check
EXTERR
FR
MODMMU
COMMERRU
TIMERRA
MODMM
Result
Result
Quality
Cold Junction
Compensation
MODOUT
Floating Point value
Figure 5-16. Thermocouple Input Module Block, Functional Block Diagram