Digital output module block description (dom), 1 digital output module block description (dom) – Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions User Manual
Page 131
Logic Functions - Book 1
DIGITAL OUTPUT MODULE BLOCKS (DOM, DDOM, WDOM)
5-11
Module
Error
Channel 2
(Same as Digital
Output Module
signal flow)
I/O
Selection
RQ1
I/O Mismatch
(SUPP/ENAB)
RBQ1
DDOERRU1
RQ2
Slot Number
Error Check
RBQ2
DDOERRA2
DDOERRA1
Board Number
Input
Channel 1
(Same as Digital
Output Module
signal flow)
Input
Module
Error
DDOM2
Module Error
(SUPP/ENAB)
MODMMA
MODMMU
MODMM
DDOERRU2
Diagnostic
Group
(NONE, 1 - 7)
Dual Digital
Output Module
DDOM1
Module Error
(SUPP/ENAB)
Figure 5-6. Dual Digital Output Module Block, Functional Block Diagram
5.3.1
Digital Output Module Block Description (DOM)
The digital output module block is configured using the general menu shown in Figure 5-7 and
the diagnostics menu.
The mnemonics, valid values, and data types for all fields that may be
selected for display and/or be used in making softwiring connections are listed in Table 5-2.
Figure 5-7. Digital Output Module (DOM), General Menu