Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions - Manual (Page 46)

Logic Functions - Book 1
INTERFACE BLOCK
3-20
110 Communication Hardware Fault Active (CMHWFACT) ................................................. – – R
When a communication module is inserted in slots 9 and 10 of a MOD 30ML (1800R) and the
built-in communication jumpers are set, a conflict of resources occurs since both require use
of communication port 1. The instrument will be placed in the DEFAULT state. No block will
be built for either case, leaving PC communication only available via communication module in
slot 7 & 8.
YES 1 “COMM HARDWARE FAULT” is active.
NO 0 Diagnostic error is not active.
111 EEPROM Fault Unacknowledged (EEPFUAK) ................................................................– WR
The unacknowledged EEPROM fault diagnostic indicates if the condition is or is not
acknowledged. The status can be read or acknowledged as follows:
YES 1 Diagnostic error is unacknowledged.
NO 0 Diagnostic error is acknowledged.
112 EEPROM Fault Active (EEPFACT) ................................................................................... – – R
The data stored in EEPROM of a MOD 30ML (1800R) could not be loaded into the instrument
database. Default values were loaded and are being used. The data values include the
calibration data for the built-in I/O and communication parameters for built-in communication
port.
YES 1 “EEPROM FAULT” is active.
NO 0 Diagnostic error is not active.
113 Memory Module Download Failed Unacknowledged (MDDLFUAK) .............................– WR
The unacknowledged memory module download failed diagnostic indicates if the condition is
or is not acknowledged. The status can be read or acknowledged as follows:
YES 1 Diagnostic error is unacknowledged.
NO 0 Diagnostic error is acknowledged.
114 Memory Module Download Failed Active (MDDLFACT) ................................................ – – R
The memory module database was not downloaded. Another diagnostic will be present to
indicate why the download did not happen.
YES 1 “MEMORY MODULE DOWNLOAD FAILED ” is active.
NO 0 Diagnostic error is not active.