ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 93)

11-93
Appendix A: Event Log Messages
This appendix provides descriptions of all the Event Log messages(ver 1.2xx)
EVENT MESSAGE DESCRIPTION
Activate UO=X UO XX activation
Actv UO=XX WB=YY UO XX is activated from key-fob YY
Alarm Z=XXX Alarm in zone No. XXX
Alarm abort P=X Alarm aborted on Partition X
Arm:P=X WB=YY Partition X armed by wireless key-fob YY
Arm:P=X C=YY Partition X armed by user YY
Bell tamper Bell tamper alarm
Bell Tamper rst Bell tamper alarm restore
Box tamper Box tamper alarm
Box Tamper rst Box tamper alarm restore
Bypass Z=XXX Zone No. XXX is bypassed
Chang code=XX Changing user code by user XX
Chang phone=X Changing MS telephone number X
Clock not set Time is not set
Clock set C=XX Time defined by user No. XX
Comm ok UO=X Bus communication restore with X10 expander ID=X
CP reset The system has reset
Date set C=XX Date defined by user No. XX
Day arm:P=X Daily Arm on Partition X
Day disarm:P=X Daily Disarm on Partition X
Day home: P=X Daily Stay (Home) Arming in Partition X
Disarm:P=X WB=YY Partition X disarmed by wireless key-fob YY
Disarm:P=X C=YY Partition X disarmed by user YY
Duress C=XX Duress alarm from user No. XX
EE ac.upload Load new parameters from PTM accessory
Enter program Entering Installer programming from keypad or UD software
Exit program Exiting Installer programming from keypad or UD software
F.tr ok Z=XXX Trouble restore in Fire zone No. XXX
F.trouble Z=XXX Trouble in Fire zone No. XXX
False code False code due to 3 wrong attempts
False restore False code alarm restore
Fire KP=XX Fire alarm from wireless keypad XX (keys 3 & 4)
Fire main KP Fire alarm from the WisDom fire emergency keys
Fire Z=XXX Fire alarm in zone No. XXX
Foil ok Z=XXX Restore in foil (Day) zone No. XXX
Foil Z=XXX Trouble in foil (Day) zone No. XXX