ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 60)

7-60
Access Code and ID
Quick-Key Parameter Default
55 55 11 Access code 5678
Defines an access code for remote programming. The four-digit access code in the
system and the software must be identical.
1. Enter a four-digit access code. This code is stored in the ABUS wireless alarm
system.
2. You have to enter the same code in the up/download software for access to this
system.
3. Press
11
and enter the four-digit code.
4. Press to confirm.
55 55 22 Remote ID Code 0001
Under this menu option, you can enter a user ID for the corresponding access
code. The four-digit ID in the system and the software must be identical.
1. Enter a four-digit access code. This code is stored in the ABUS wireless alarm
system.
2. You have to enter the same code in the up/download software for access to this
system.
3. Press
22
and enter the four-digit code.
4. Press to confirm.
7.6.3
55 66
Controls
Under Controls, you define how telephone alarm transmission is controlled.
To access the Controls menu:
1. Select the Dialer menu as described on page 7-59.
2. Under Dialer, press
66
to access the Controls menu option. You see the following on the display:
NOTE:
The menus of this option require you to enter [Y] YES or [N] NO.
3. Make the settings in the Controls menu as described below:
Select the menu options with the Quick-Keys or press and .
Press to switch between [Y] YES and [N] NO and then press to confirm. (Repeat this
procedure for each parameter as required.)
Press to exit the menu option.