ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 23)

7-23
Chapter 7 Settings in installer menu
This chapter describes the options and features of the installer menu of your ABUS wireless alarm system. The following is an
overview of the main menu options according to their sequence in the installer menu:
11
System, page 7-24
22
Zones, page 7-36
33
Outputs, page 7-47
44
Codes, page 7-53
55
Dialer, page 7-59
66
Not active
77
Key-fobs, page 7-67
88
Keypads, page 7-70
99
Sounder, page 7-70
00
Exit, page 7-71
7.1 Introduction to installer menu
The following pages describe the menu options for programming using the buttons of your ABUS wireless alarm system. For
programming the ABUS wireless alarm system with the Downloader Software, see the separate software instructions.
To access the installer menu, deactivate the ABUS wireless alarm system, press the star button followed by 9, followed by 1.
99 11
You are asked to enter the installer code for the installer menu. If this has not been changed from the factory default, it is 0133. Enter
this code and confirm by pressing the lozenge button.
00 11 33 33
You are now in the installer menu.
You can reach the items of the installer menu by scrolling with the buttons. When you reach the required menu option,
confirm by pressing . To exit a menu option, press . It is faster if you use the Quick-Key function. You simply enter the
digits assigned to the menu option, e.g.: for menu option 111 (stands for Entry delay), press
11 11 11
. Return to the main menu by
pressing three times.
These instructions are shown in columns, explained in the following table:
Column header Description
Quick-Key The Quick-Key function is a button sequence to be pressed to reach a menu option directly. It is listed in
numerical order.
Parameter Name and explanation of the menu option to be programmed.
Default The default factory values. The selected values are suitable for most standard applications.
Range The options you can select for the menu item.