ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 67)

7-67
7.7
77
Key-fobs
Under key-fobs, you learn how to train up to eight 4-button key-fobs with rolling code to work with the ABUS wireless alarm system.
With the wireless key-fob/remote control, you can activate/deactivate the system, trigger a panic alarm, and control a switch output.
The following is an overview of the menu options according to their sequence in the key-fobs menu:
77 11
Allocation, page 8-68
77 22
Parameters, page 8-69
22 33
Communication Test, page 8-70
To access the Key-fob menu:
In the installer menu, press
77
or press or until you find the [7] key pad menu option. Press . You see
the following on the display:
You are now in the Key-fobs menu and can access the submenus as described in the following sections.
7.7.1
77 11
Allocation
Under this menu option, you train the 4-button key-fobs.
To access the Allocation menu:
1. Select key-fobs.
2. Under key-fobs, press
11
to access the Allocation menu option. You see the following on the display:
3. On the alarm system, select the number of the remote control you want to train and press .
4. To train the remote control:
Press
11
to go to the next remote control.
Press
22
to train a new remote control or overwrite an already trained remote control. Send a training signal
(within 255 seconds) from the remote control by pressing the (activate) button on the remote control for at
least 2 seconds. Every time you press a button, the LED of the remote control lights up. When the ABUS
wireless alarm system has successfully trained the remote control, you hear a short beep as confirmation.
Press
33
to delete the selected remote control. Press to select either [Y] or [N] to make your selection,
and then press to confirm.
5. Repeat steps 2 to 4 to train further remote controls.