ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 31)

7-31
Receiver:
Quick-Key Parameter Default Range
11 33 44 Delete detectors
Deletes all trained wireless detectors simultaneously. To delete the wireless detectors,
confirm the setting by pressing . To exit this menu option without deleting detectors,
press .
NOTES:
If the J9 jumper was placed on both pins, this menu appears first in the installer menu.
7.2.4
11 44
Set Clock
Under Set Clock, you set the system date and time.
To access the Set Clock menu:
1. Select the main menu System as described on page 7-24.
2. In the System menu, press
44
to get to the Clock menu option:
3. Select and configure the settings in the Set Clock menu as follows:
Set Clock:
Quick-Key Parameter Default Range
11 44 11 System Time 00:00 HH:MM
Sets the current time in 24-hour format. Enter the current time on the operating panel
keypad. Click or to move forwards or backwards in the display.
11 44 22 System Date 01 JAN 2007 (MON) DD MM YYYY
(DAY)
Sets the current date. Enter the date and the year via the keypad. Click or
to move forwards or backwards in the display. Change the month by
pressing .