ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 45)

7-45
7.3.4
22 44
Editing
Under Editing, you can copy and delete programmed zones.
To access the Editing menu:
1. Select the Zones menu as described on page 7-36.
2. In the Zones menu, press
44
to get to the Editing menu option. You see the following on the display:
Editing
Quick-Key Parameter
22 44 11 Copy to a zone
Copies all settings programmed for a zone (except the zone name).
1. Press
11
. You see the following on the display:
2. Press the number buttons 1 to 9 to select the zone you want to copy and press
or to move the cursor. Press 1 to 9 again to select the zone to
which you want to copy.
The procedure is confirmed with a beep if successful.
3. Press to exit the menu option.
22 44 22 Delete a Zone
Deletes a zone. The zone is not completed deleted, but its zone type is set to “not
used”. The zone settings are retained.
1. Press
22
.
2. Press or or the number buttons 1 to 9 to select the zone you want
to delete.
3. Press to switch between [Y] YES and [N] NO and press to
confirm.
4. Press to exit the menu.
22 44 33 Add/Copy Partition
Copies a partition to another partition.
1.
Press
33
.
2.
Press the number buttons 1 to 3 to select the area you want to copy and press
or to move the cursor. Press the number buttons 1 to 3 again to
select the area to which you want to copy.
The procedure is confirmed with a beep if successful.
3. Press to exit the menu option.