ABUS FU9001 Privest Wireless Alarm Base Set Installation User Manual
Page 63
7-63
Dialer: Parameter
Quick-Key Parameter
Default
Range
55
77
44
22
Wait 9 seconds
Press
22
followed by
.
55
77
55
Redial wait
30 seconds
30 or 60
seconds
The number of seconds between a redial of the same number.
55
77
55
11
Wait 30 seconds
Press
11
followed by
.
55
77
55
22
Wait 60 seconds
Press
22
followed by
.
55
77
66
Dialing method
DTMF
DTMF (Touch Tone
®), pulse
20 BPS and pulse 10 BPS
Select DTMF (Dual-Tone Multi-Frequency) as the dial method. Pulse dialling is
necessary only for a few older PBXs.
55
77
66
11
DTMF (Touch Tone
®)
Press
11
and then
to activate the DTMF dial method.
55
77
66
22
Impulses @ 20 BPS (pulses per second)
Press
22
and then
to activate the pulse dialling 20 BPS method.
55
77
66
33
Impulses @ 10 BPS (pulses per second)
Press
33
and then
to activate the pulse dialling 10 BPS method.
55
77
77
Pulse Duty Cycle
61/39%
67/33% and
61/39%
Further settings are necessary only for the pulse dialling method.
55
77
77
11
67/33%
Press
11
and then
for European telephone systems.
55
77
77
22
61/39%
Press
22
and then
for American telephone systems.
55
77
88
Swinger Limit
00
00 to 15
The Alarm Limit option is provided to prevent multiple triggering on a zone within
the activated time. Setting 01: A triggered zone is not transmitted again if this has
already happened. If you raise the limit, the alarm is transmitted according to your
setting.
NOTE:
Enter 00 to disable the alarm abort. Every time the zone triggers, the alarm is transmitted
again.
55
77
99
Periodic Test
Defines a time in which the ABUS wireless alarm system calls the UD numbers
to test the telephone connection. This feature is possible only if a PC with active
software is ready to receive.