ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 72)

7-72
7.9
99
Siren
Under Siren, you can assign 3 sounders to the ABUS wireless alarm system. You can choose between internal wireless sounders
and external wireless sounders. The following is an overview of the menu options according to their sequence in the Siren menu:
99 11
Allocation, page 8-75
99 22
Parameter, page 8-76
99 33
Comm. Test, page 8-77
99 44
Calibration, page 8-77
99 55
Tamper Mute, page 8-78
To access the Siren menu:
• In the installer menu, select 99 or press or to access the corresponding menu option.
Press . You see the following on the display:
You are now in the Siren menu and can access the submenus, as described in the following section.
7.9.1
99 11
Allocation
Here you can allocate a new sounder to your system.
To access the Allocation menu:
1. Select the Siren menu.
2. Under Siren, press
11
to access the Allocation menu option. You see the following on the display:
3. Press to select the type of sounder you want to train. Two types are available:
• INWS1: internal wireless sounder
• ODWS1: outdoor wireless sounder
4. Select a sounder type and press . You see the following on the display:
5. Press to make the following settings for the selected sounder. After each setting, confirm your
selection with .
• Sound: Set to Y to activate the sounder in the event of an alarm.
• Squawk: If you set this option to Y, the sounder emits an acknowledgement signal when it is successfully
activated/deactivated.
• Squawk strobe (external sounders only): If you set this option to Y, the sounder emits a visual
acknowledgement signal when it is successfully activated/deactivated.
6. After confirming all your settings, you see the following on the display: