ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 80)

8-80
Message Labels
Quick-Key Parameter Default Range
77 22 33 Partition Message
Press
33
. You see the following on the display:
Press or to select a partition and then press .
The following options are available:
Press
11
to play the partition announcement. You hear the
announcement over the system loudspeaker.
Press
22
to record a new text. You see the following on the display:
Press and speak your message into the microphone. The counter
on the display counts down the remaining seconds until the recording time
expires.
Recording stops automatically after 2 seconds. If you want to stop
recording earlier, press .
You now have to assign this announcement to a zone.
Press
33
. Press or to select a zone and then press
.
77 22 44 Utility output message
NOTE:
The switch output must be defined as an FM code in order to be able to allocate a voice
message to it. See also Follow User Code.
Press
44
. You see the following on the display:
Press or to select a switch output and then press .
You see the following on the display:
The option in the Choose UO menu presents the FM Code switch outputs. Select the
number of the appropriate switch output for the message selected in step 3, or select
00 if you do not want to allocate a message to the switch output.