ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 75)

7-75
7.9.5
99 55
Tamper Mute
Under
Tamper Mute, you can deactivate the tamper function of the sounder for the current programming process. This enables
you to open the sounder without triggering a tamper alarm. Enable this function if you want to open the sounder case, for
example to change the batteries.
To access Tamper Mute menu:
1. Select the Siren menu as described above.
2. Under Siren, press
55
to access the
Tamper Mute menu. You see the following on the display:
3. Confirm with
. The system now sends a message to all sounders and the tamper function is
disabled until you finish programming.
NOTE:
If a tamper alarm has already been triggered, it cannot be stopped by this function. Exit the installer menu and
deactivate the system or remove the batteries from the sounders.
4. When you exit the installer menu, the tamper function is automatically reactivated on all sounders.
Press to exit the menu option.