ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 79)

8-79
Voice message: message name
Quick-Key Parameter Default Range
Recording stops automatically after 10 seconds. If you want to stop recording earlier,
press .
NOTE:
If you do not press as soon as your recording is finished, you may have unwanted
noise or a long pause in your message.
Press to exit the menu option.
77 22 22
Zone message
Press
22
. You see the following on the display:
Press or to select a zone and then press .
The following options are available:
Press
11
to play the zone announcement. You hear the announcement
over the system loudspeaker. The factory default for Zone 1 is “Zone 1
"
Press
22
to record a new text. You see the following on the display:
Press and speak your message into the microphone. The counter on the
display counts down the remaining seconds until the recording time expires.
Recording stops automatically after 2 seconds. If you want to stop
recording earlier, press .
You now have to assign this announcement to a zone.
Press
33
. Press or to select a zone and then press
.
You can change the zone name in the installer menu. The recording and
the zone name should be identical.