ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 68)

7-68
7.7.2
77 22
Parameters
Under Parameters, you program the function and the keys of the remote control. The four buttons of the remote control can be
adapted to individual requirements.
To access the Parameters menu:
1. Select the Key-fob menu as described on page 8-68.
2. Under Key-fob, press
22
to access the Parameters menu option. You see the following on the display:
3. Select the remote control you want to reprogram and press .
Reprogramming a remote control
Every remote control has 4 buttons, and each button can be programmed for a different function.
To change the settings of the remote control:
1. Assign to every remote control the areas you want to operate with it. The letter “Y” under the number means
that the remote control can operate this area. To change the setting, press
11
,
22
or
33
.
2. Press to confirm. You see the following on the display:
3. For button 1 ( ), you can choose between the following functions:
None: The button is not activated.
Arm:
The button externally activates all previously selected areas.
Stay: The button internally activates all previously selected areas.
To select the functions, press or . To confirm, press .
4. Now select between whether an exit delay time starts at activation (Delayed) or whether your system is
activated immediately (Instant).
5. Press . The system goes automatically to the next button and you see the following on the display:
6. For button 2 ( ), you can choose between the following functions:
None: The button is not activated (default).
Disarm: The button is used to disarm selected partitions.
7. After selecting an option for the button, press . The system automatically goes to the next button.
8. You see the following on the display:
9. For button 3 (small button), you can choose between the following functions:
None: The button is not activated (default).
Panic: The button triggers a panic alarm.
Utility Output: The button activates a utility output.