ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 57)

7-57
7.5.4
44 44
Installer
Default: 0133
With the installer PIN, you have access to the installer menu and thus the authority to change all system parameters. The installer code
defined in the factory is: [0][1][3][3]
ABUS strongly recommends changing the PIN defined in the factory.
To access the Installer menu:
1. Select the Code Maintenance menu as described on page 7-53.
2. Under Code Maintenance, press
44
to access the Installer menu option. You see the following on the
display:
3. Enter the new Installer PIN on the system keypad and then press
4. Confirm the new PIN by repeating the code, and then press .
5. Press to exit the menu option.
7.5.5
44 55
Sub-Installer
Default: 0233
With the sub-installer PIN, you have restricted access to selected items of the installer menu. Der vom Werk eingestellte Sub-
Programmier Pin lautet: [0][2][3][3]
ABUS strongly recommends changing the PIN defined in the factory.
The restrictions on the sub-installer are as follows (the LCD display shows “Disabled” for each restricted menu item):
• System menu: No change of the menu option “Arm/Disarm”.
• Pin Code menu: No change of the installer PIN.
• Dialer menu: Can change redial of FM numbers only.
To access the sub-installer menu:
1. Select the Code Maintenance menu as described on page 7-53.
2. Under Code Maintenance, press
55
to access the Sub-Installer menu option. You see the following on
the display:
3. Enter the new sub-installer PIN on the system keypad and then press
4. Press to exit the menu option.
Using the sub-installer PIN code
This section describes how the sub-installer gains access to the sub-installer menu.
Using the Sub-Installer code:
1. From the user menu, press [9] [2].
2. Enter the sub-installer code and press . The sub-installer now has restricted access to the installer
menu.