ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 6)

2-6
Chapter 2 Safety information
For damage caused by non-compliance with these installation instructions, no guarantee claims are possible. No liability can
be accepted for resulting damage.
In the case of material or personal damage caused by improper operation or non-compliance with the security notes, no
liability or guarantee claim can be accepted.
For security and authorisation reasons (CE), the unauthorised alteration and/or changing of the alarm system and its components is not
permitted.
Only a regulation network power socket (230 Volt / 50 Hz or 110Volt / 60Hz) of the public supply network can be used as a power
source.
Make sure the alarm system is correctly put into service. Follow these installation instructions carefully to ensure this.
The equipment should be installed and started up by a correspondingly qualified person to ensure the safe operation of this product.
When installing the product, make sure the supply power line is not restricted or damaged by sharp edges.
Never install the alarm system near combustible or easily flammable materials such as curtains.
Do not expose the alarm system to high temperatures, strong vibrations or dampness.
Equipment operated with mains electricity should be kept out of the reach of children. For this reason, be particularly careful when
children are present.
In commercial institutions, ensure compliance with accident prevention regulations issued by professional bodies responsible for
electrical equipment.
Pay special attention to passages marked with an exclamation mark in these instructions. These identify particularly important
explanations or safety hints that must be observed.