ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 59)

7-59
7.6
55
Dialer
The Dialer menu enables you to transmit alarms as voice text by telephone. In this menu, you also make the settings necessary for
programming the system via a modem. Some of the options in this menu cannot be selected since they are not active in this version.
You can access the following submenus:
55 44
UD Telephone number, page 67
55 55
UD Access and ID, page 7-59
55 66
Controls, page 7-60
55 77
Parameters, page 7-62
55 99
Follow Me), page 7-64
To access the Dialer menu:
In the installer menu, press
55
or press or until you find the [5] Dialer menu option. Press . The
first submenu appears on the display:
You are now in the Dialer menu and can access the submenus as described in the following sections.
7.6.1
55 44
U/D telephone number
Under U/D telephone number, you can define a telephone number in the system that is dialled for remote servicing of the system by
PC.
To access the U/D telephone number menu:
1. Select the Dialer menu as described on page 7-59.
2. In the Dialer menu, press
44
and then enter the telephone number for remote servicing with up to 32 digits including
local area and other codes.
3. Press .
If you do not want to service or program the system via a modem connection, no input is required here.
7.6.2
55 55
U/D Access and ID
Under U/D Access and ID, you can define an access PIN and a user ID for remote servicing of the ABUS wireless alarm system.
To access the U/D Access and ID menu:
1. Select the Dialer menu as described on page 7-59.
2. In the Dialer menu, press
55
to select U/D Access and ID. You see the following on the display:
3. Select and configure the settings in the U/D Access and ID menu as follows: