ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 81)

8-81
Message Labels
Quick-Key Parameter Default Range
77 22 55 Macro Message
Press
55
. You see the following on the display:
Press or to select a macro and then press .
The following options are available:
Press
11
to play the macro announcement. You hear the announcement
over the system loudspeaker.
Press
22
to record a new text. You see the following on the display:
Press and speak your message into the microphone. The counter on the
display counts down the remaining seconds until the recording time expires.
Recording stops automatically after 2 seconds. If you want to stop recording
earlier, press .
8.1.3
77 33
Test Message
Under Test Message, you can test recorded and assigned voice announcements.
To conduct a Test message:
1. Select the Voice message menu.
2. In the Voice message menu, press
33
to access the Test Message menu option. You see the following on the
display:
3. Conduct the test locally or by telephone as follows: