ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 62)

7-62
Controls
Quick-Key Menu option Default
55 66 10 10 Answering Machine
Override YES
YES: Answering machine override is activated.
• The upload/download software calls the ABUS alarm system.
• The software hangs up following a ring by the U/D user.
• The software calls again within one minute.
• The
ABUS wireless alarm system is programmed to answer this second call
immediately and not forward the call. The function of the number of calls for
U/D is deactived.
NOTE:
This property is used to prevent problems with a rear-position answering machine or fax
machine with remote-controlled upload/download operation.
NO: The ABUS wireless alarm system accepts the call following a specified
number of U/D calls.
7.6.4 5
5 77
Parameters
Under Parameters, you have further options for setting the telephone alarm transmission of your ABUS wireless alarm system.
To access the Parameters menu:
1. Select the Dialer menu as described on page 7-59.
2. Under Dialer, press
77
to access the Parameters menu option. You see the following on the display:
3. Select the menu options in the Parameters menu as in the table below:
•
Select menu options with the keypad or press or to access the corresponding menu option.
•
Change the setting accordingly and/or confirm the value already entered by pressing .
•
Press to exit the menu.
Dialer: Parameter
Quick-Key Parameter Default Range
55 77 22 FM Retries 03 01 to 15
Defines the number of repeated call attempts by the alarm system in the event of an alarm.
55 77 33 Rings to U/D 12 01 to 15
Defines the number of ringing tones before the ABUS wireless alarm system
accepts the call.
NOTE:
This feature is deactivated if the Answering Machine Override option is enabled (see
page 7-62).
55 77 44 Dial Tone Time 6 seconds 6 or 9 seconds
Defines the length of time the ABUS wireless alarm system waits for a dial tone if this is
programmed. (See also page 7-61.)
55 77 44 11 Wait 6 seconds
Press
11
followed by .