Demonstration, Operation manual, Tool changes – ACU-RITE MILLPWR 2 Axes User Manual

Page 89: Clearing the program

DEMONSTRATION

MILLPWR

Operation Manual

4-20

Tool Changes

Whenever you encounter a

SET TOOL

step,

MILLPWR

will display the DRO screen

and let you know which tool to load.

•

Use the

MOVE TABLE

softkey and arrow keys to move the tool

away from the workpiece.

•

Insert the required tool into the spindle.

•

Using the

MOVE TABLE

feature, position the tool over

the surface of a known depth on the workpiece.

•

Press the

DATUM

softkey.

•

Position the tool so that it touches the surface of the
workpiece, then enter that position into the Z-axis.

•

Press the

USE

key.

•

Raise the tool and press the

key to run the

demonstration program.

Clearing the Program

•

From the PGM screen, press the

CLEAR

softkey

to clear the program from the screen.

•

Press the

YES

softkey. The PGM screen will be cleared and ready

for another program.

If the surface is
at 0, use the
Z = 0 softkey.