ACU-RITE MILLPWR 2 Axes - Manual (Page 42)

PROGRAMMING
MILLPWR ®
Operation Manual 3-13
MANUAL POSITIONING
Use this option to position the table using the handles. MILLPWR will operate just like a pro-
grammable readout—each target position will be preset into the readout, and you will be
prompted to position the table manually. This feature is especially useful when navigating
around islands.
DISABLE LOOK AHEAD
Normally, MILLPWR checks each step in a continuous tool path with other steps to determine
if there is an intersection in the tool's cutting path (such as a figure 8). This is called look
ahead. Press the
DISABLE LOOK AHEAD softkey, the program will run without performing
this function.