ACU-RITE MILLPWR 2 Axes - Manual (Page 55)

PROGRAMMING
MILLPWR ®
Operation Manual 3-26
Loading a MILLPWR (MPT) Program
The LOAD softkey allows you to open programs that have already been saved. The steps
below tell you how to load a program from MILLPWR 's internal memory, a 3 1 /
2
" floppy
disk, or your PC.
From MILLPWR 's internal memory:
• Save, then clear any open programs.
• From the PGM screen, press the PROGRAM FUNCTIONS softkey, then press the
LOAD softkey. The last directory that was selected and any programs it contains will
appear.
If the program is saved in the MILLPWR directory:
• "MILLPWR" should appear at the top. If it doesn't, check that the USE FLOPPY and
REMOTE STORAGE softkeys are not selected.
• Press the format button until MPT is displayed.
• Using the arrow keys, highlight the program you want to load, then press the LOAD
softkey. The program you have selected should appear on the screen.