ACU-RITE MILLPWR 2 Axes - Manual (Page 147)

PROGRAM STEPS
MILLPWR ®
Operation Manual 5-58
MILLPWR will explode the “Bolt Circle” steps into eight steps (shown on the left side,
below). Next highlight the step for the hole that needs to be delete (shown in the
center) and press the
CLEAR key. As you can see in the graphic on the right, the bolt-
hole circle pattern now has seven holes.
To explode a step:
• Highlight the step.
• Press the STEP FUNCTIONS softkey.
• Press the EXPLODE softkey.
The step that you exploded will be replaced with the individual lines, arcs or positions
that made up the step.
Notice how the
individual
“Pos/Drill”
steps replaced
the “Bolt
Circle” step.