Programming, Operation manual – ACU-RITE MILLPWR 2 Axes User Manual
Page 44
PROGRAMMING
MILLPWR
®
Operation Manual
3-15
Feed+ and Feed-
The
FEED+
and
FEED-
keys will change the feed rate by a certain percentage with
each key press. The feed rate percentage will be displayed in the status bar at the top
of the screen. A feed rate percentage of 100% means that actual feed rates will run at
100% of the programmed feed rates. If the feed rate percentage is 50%, actual feed rates
will run at half of the programmed feed rates.
Press the
FEED+
and
FEED-
keys at any time, even while the table is moving.