Program steps – ACU-RITE MILLPWR 2 Axes User Manual
Page 111
PROGRAM STEPS
MILLPWR
®
•
Enter the feed rate.
•
If you want to program a finish cut, press the
MORE
softkey. Otherwise, press the
USE
key.
Finish
Enter the amount of material to be removed
during the finish cut.
Enter the feed rate for the finish cut.
Select the finish cut's direction. Press
the
CW
softkey for a clockwise direction
or the
CCW
softkey for a counter-clockwise
direction.
Enter a step over percentage (how much you
want the tool to overlap on each pass).
Press the
USE
key.
Note:
If the tool size and type listed in the "Tool" field are incorrect, change the tool
settings before running the program (refer to Programming a Tool Step).
Operation Manual
5-22