Program steps, Operation manual – ACU-RITE MILLPWR 2 Axes User Manual

Page 109

Text mode
Original mode

PROGRAM STEPS

MILLPWR

Operation Manual

5-20

•

Enter the feed rate.

•

If you want to program a finish cut, press
the

MORE

softkey. Otherwise, press the

USE

key.

Finish

Enter the amount of material to be
removed during the finish cut.

Enter the feed rate for the finish cut.

Select the finish cut’s direction. Press the

softkey for a clockwise

direction or the

CCW

softkey for a counter-clockwise direction.

Enter a stepover percentage (how much you want the tool to overlap on
each pass).

Press the

USE

key.

Note:

If the tool size and type listed in the "Tool" field are incorrect,
change the tool settings before running the program (refer to
Programming a Tool Step).