Program steps, Operation manual – ACU-RITE MILLPWR 2 Axes User Manual

Page 130

PROGRAM STEPS

MILLPWR

Operation Manual

5-41

•

Enter the feed rate.

•

Press the

EDIT TEXT

softkey.

•

Notice that the screen
is divided into two sections—
“Text Block” and “Char-
acters.” You can switch
from one to the other by
pressing either the

TEXT

BLOCK

CHARACTER

soft-

key. Use the arrow keys
to move around within each
section.

•

In the “Character” section, highlight a letter, number, symbol or space. Press the

ENTER

key to make a selection. (The alphabet block on the left side represents

capital letters; the block on the right side represents lowercase letters.)

To add a space, move the cursor to a blank spot anywhere within the
“Characters” box and press the

ENTER

key.

You can edit text by pressing the

TEXT BLOCK

softkey. Highlight the character

you want to edit, and then press one of the following:

The

CLEAR

key will delete a character.

The

DELETE LINE

softkey will erase the entire line of text that the cursor

is in and move all following text lines up.

The

INSERT LINE

softkey will insert a blank text line, moving existing

text lines down.

The

CLEAR ALL

softkey will erase all of the text within the text block.

•

When you have finished creating/editing the text, press the

EDIT TEXT

softkey

(or press the

USE

key) to return to the “Engrave” screen.

MILLPWR

will display

the text that you have created on the right.

•

Press the

EDIT TEXT

softkey if you want to make changes, or press the

USE

key to add the engraving step to the program.