Xerox 4635 - Manual (Page 79)

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS0320 Output tray 2 selected
One of the following commands was entered:
—SELECT
—SELECT 2
—SELECT AUTO
—SELECT 2,SAMPLE
Output will be delivered to stacker tray 2
.
The printer control console displays :
Output tray 2 selected
Action None.
OS0410 Separate is OFF
The SEPARATE OFF command was entered, cancelling the
previously entered SEPARATE command.
Action None.
OS0411 Stitch is OFF
Confirms a STITCH OFF command.
Action None.
OS0420 Separate is ON
The SEPARATE command was entered. The system will switch
output to a currently inactive stacker tray at the start of the next
report.
Action None.
OS0430 Set command accepted
Confirms a CLUSTER SET command. (This includes CLUSTER
SET/NR, CLUSTER cluster-name SET, or CLUSTER cluster-name
SET/NR commands.)
Action None.
OS0500 Output stopped
The STOP or STOP O command was entered or the
key was pressed. Printing has stopped. (Input continues.)
Action To restart:
Enter CONTINUE or CONTINUE O
or
Press the key.
OS0510 Input stopped
The STOP or STOP I command was entered, or the key
was pressed. The system has stopped transmitting data and is
reading it onto the system disk.
Action To restart:
Enter CONTINUE or CONTINUE I command
or
Press the key.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 6-3