Xerox 4635 - Manual (Page 61)

IFU (INTERPRESS FONT UTILITY) MESSAGES
IF2976 Some parameter(s) are not in easy values.
One or more of the parameters specified in the font profile do
not match the easy values of the FIS font master.
Action 1. Correct the font profile to match the easy values.
2. Reenter the ADD command.
IF2979 Invalid DCALSO parameter.
The DCALSO (DATA CENTER ALSO) parameter specified in the
font profile is incorrect.
Action 1. Change the DCALSO parameter in the font profile to YES or
NO.
2. Retry the ADD command.
IF4010 Easy values are missing point sizes or orientations
The FIS master is incorrectly formatted and, therefore, does not
specify point sizes and orientation.
Action None.
IF4110 FIS master error; aborting ADD
Due to an error in the FIS master, the requested ADD command
is being aborted.
Action 1. Obtain a valid FIS master.
2. Retry the command.
IF4111 FIS processing error; aborting ADD
Due to an error in the FIS master, the ADD command is being
aborted. This error is probably the result of a previous error
which should have displayed a message.
Action Contact your systems specialist or Xerox Customer Service.
IF4112 Unable to create a font file, x; aborting ADD.
An error has occurred when the system attempted to access the
font file. The ADD command has been aborted.
Action None.
IF4120 Easy values are invalid. fatal error in Interpress
A fatal Interpress error occurred while an FIS master was being
processed. The Interpress error appears on the system controller
display before this IFU message.
Action 1. Correct the FIS master.
2. Reenter the ADD command.
IF4121 Easy values are invalid. fatal error in FIS master.
An error occurred during processing of an FIS master.
Action 1. Correct the FIS master.
2. Reenter the ADD command.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 5-23